1. The butt weld is easier to inspect non destructively than the fillet welds.

2. AEGIS TECHNOLOGIES - 038390301030, 90301030, Easy to weld, the Whizweld Branchlets beveled design allows it to sit squarely on the header for uncomplicated, one-pass welds with automatic welding equipment

3. AEGIS TECHNOLOGIES - 038390300525, 90300525, Easy to weld, the Whizweld Branchlets beveled design allows it to sit squarely on the header for uncomplicated, one-pass welds with automatic welding equipment

4. This defect usually occurs in welds that require multiple passes and there is poor overlap between the welds.

5. Alternately, the modules are assembled with aluminum welds and accumulating end tanks similarly attached thereto with aluminum welds.

6. Male Weld Bungs and Female Weld Bungs are also available with steps

7. Male Weld Bungs and Female Weld Bungs are also available with steps

8. In all test pieces containing a weld, the weld is machined to trim the surplus.

9. In all test pieces containing a weld, the weld is machined to trim the surplus

10. Annealing also removes stresses that can occur when welds solidify

11. At the environment medium, the tubeplate joint welds of titanium reboiler were constantly effected by the alternation stress, welds cracking was occurred in the end.

12. Buttering A variation of surface welding in which weld metal is deposited on one or more surfaces to provide metallurgically compatible weld metal for the subsequent completion of the weld

13. They produce strong welds, but with a coarse and convex-shaped joint surface.

14. Perfect for Borescope inspection and measurement of turbines, welds, pumps

15. Beadeye (Visual Weld Inspection Solution) Features

16. Where did you learn to weld?

17. Plasma racks and laser welds are all up to code

18. More About Weld-On Bungs and Fittings

19. Key words: structural steel, welded joints, fatigue, improvement methods, fillet welds, finite element analysis.

20. In areas with high protection requirements, all welds should be tested.

21. Some metals weld better than others.

22. Similarly all the valid weld gun sizes are calculated corresponding to each of the weld gun approach direction.

23. Aluminum Beams cut, weld and machine well.

24. Vibrant Performance 11181 - Vibrant Performance Weld Bungs

25. Vibrant Performance 11181 - Vibrant Performance Weld Bungs

26. A Circumferential weld is a type of weld that is used to join two round objects around their circumference

27. Backing is defined as material placed at the root of a weld joint for the purpose of supporting molten weld metal

28. It seems you're trying to weld her.

29. Plants used in dyeing - Woad, Weld, Madder, Sumach.

30. Building construction, repair, namely repair of pipes, pipelines, pipe welds and coatings

31. Key words: connections, design tables, eccentric, fillet welds, limit states, ultimate strength.

32. This sharpens everyone up and welds the entry into a cohesive unit.

33. Muscle tears set solid[Sentencedict], discs weld together.

34. The reason I say Aluminize after you weld the pipes up is because you'll burn the aluminum off in the area you weld and will be prone to rusting in the area of the weld

35. This made "the General' another very wealthy Weld.

36. The crisis helped to weld the party together.

37. Clevises available in weld-in and threaded applications

38. Weld claims he followed up with an investigation.

39. For cross wire welds inside the lamps, tight tolerances during wire penetration are requested.

40. These are materials lacking stress concentrations, such as holes, notches, rivets or welds.

41. There was previously no non-destructive testing (NDT) technique for volumetric examination of the aluminothermic rail welds in the CWR system, and so these welds were not volumetrically examined in any EU country.

42. We weld parts of aluminium, magnesium and structural steels.

43. Paintwork will gleam, welds will be even, hydraulic pipes neatly threaded about the machine.

44. The girth weld of an offshore pipeline is fractured.

45. All the direct welds on the tank and pipework shall be subject to suitable NDT.

46. Summit Racing SUM-220070 - Summit Racing® Weld-In Bungs

47. He was going to repair the weld, when it broke.

48. All the segments have straight weld seams, so that workers perform construction at a high speed, and deformation of the weld seams can be controlled easily.

49. Bevelling TOOLS FOR WELD SEAM PREPARATION - MORE PRODUCTIVE THAN EVER

50. The way you weld them with that acetylene flavor, the...

51. 6 It's possible to weld stainless steel to ordinary steel.

52. There's space to experiment and to weld and to test things.

53. Seals underbody , weld joints, trunk interior and firewall of motor vehicles.

54. • Check the welds on metal bunk beds where the bed frame is fixed to the structure.

55. ·experiments investigating the nuclear reactor’s structural material degradation under irradiation (graphites, model steels, welds, etc.)

56. A blacksmith welds together the links of a chain that can safely anchor a ship.

57. It then proceeds inside the tube to the next weld.

58. He did weld many Muslims and most Hindus into one nation .

59. It has a low welding spatter and aesthetic formation of weld.

60. I'll weld it together and I'll have the frame for my body.

61. These tubes are made by the weld-forging process after hot working.

62. Die stamp or arc weld your postcode on valuable equipment Crime costs.

63. AN Weld Bungs available in mild steel, stainless steel or aluminum

64. Weld-On Threaded Bungs for 1" and 1-1/2" ID Tubing These Weld-On Threaded Bungs (also called "tube adapters" or "tube-end weld nuts') are used to weld attachment points for threaded linkages to the end of 1" and 1-1/2" ID tubing to create suspension links, steering components and even frame accessories

65. Branchlet designed for automatic welders with its compound weld bevel design

66. William F.. Weld, insiders worry that Payne may be too nice.

67. Carbide Burrs are used for grinding, deburring, shaping, and weld bead removal

68. His job is now to weld the players into a single team.

69. The Buttering is a surfacing variation used to deposit surfacing metal on one or more surfaces to provide compatible weld metal for the subsequent completion of the weld.

70. Anthelion socket weld fitting geotechnology halkaistavuus begribeligvis červeň par (n.) spoilt child; v

71. Weld metal compositions for joining steel structures in the oil and gas industry

72. Usually there are good communication and common interests that weld the family together.

73. We used to weld pipes with direct. C are welder A . C . welder.

74. Fuse the trigger mechanism together with weld within receiver/frame, where applicable.

75. Its applications to weld and railway wheel and axle inspection were described.

76. They will also be used on factory floors to weld things together.

77. The spot welds are formed in the acute angle (5) between the leaf spring (2) and the wire.

78. Significant reduction in joint preparation and fit-up time can be realized while the Belled end allows for a fillet weld in place of a more difficult butt weld joint.

79. The enclosure is constructed from electromagnetically conductive materials and includes continuous welds along seams joining each material.

80. Weld County declares 'Meat-In' with Barbecues, sales on meat, restaurant specials